About The Role
Inspect parts at cutting, punching, bending, welding and finishing stages against drawings and control plan; verify dimensions, flatness, burrs, hole position, bend angle using vernier, micrometer, height gauge, go/no-go gauges
Check and approve first-off parts after setup, tool change, die change or shift change before production release
Identify burrs, cracks, dents, scratches, springback errors, weld spatter, porosity; tag, segregate and report non-conforming (NC) material
Use instruments correctly; check calibration status; flag damaged or overdue instruments
Fill inspection reports, checklists, traceability records (batch, heat no., operator); maintain SPC data
Report recurring issues; assist in root cause analysis (5-Why, fishbone); verify corrective action effectiveness
Give operators quick feedback on trends/defects; stop line on critical defects
Contribute to targets for PPM, in-house rejection, rework and scrap reduction
Support final inspection, packing verification and labeling checks
Follow ISO 9001, 5S, PPE and safety rules; keep inspection area organized
